车辆工程系

新闻中心

首页> 新闻中心> 通知公告

荆哲铖

发布日期:2020-02-24浏览次数:
姓名荆哲铖
性别
职务职称讲师
博导-所在学科 
硕导-所在学科车辆工程
所在学科车辆工程
硕导/博导硕导(专硕)
电子信箱jingzc@ujs.edu.cn
学习、工作经历
 
学习经历
江苏大学汽车与工程学院车辆工程专业获工学学士学位
江苏大学汽车与工程学院车辆工程专业获工学硕士学位
江苏大学汽车与工程学院车辆工程专业获工学博士学位
工作经历
2019至今  江苏大学汽车与工程学院车辆工程专业 讲师
 
社 会 兼 职
 
主 讲 课 程
 
《汽车设计》《汽车试验学》《汽车构造》《车辆工程综合实践》《专业实习》
 
研 究 方 向
 
智能轮胎先进技术研究
汽车行驶工况研究
汽车制动系统性能检测研究
商用汽车复合制动技术研究
 
主 要 论 著
 

1、Brake energy recovery and comfort control strategies for battery electric vehicles: Real-world testing data from actual roads[J]. Journal of Energy Storage, 2026, 153: 120948.

2、Improvement in and Validation of the Physical Model of an Intelligent Tire Considering the Wear[J]. Sensors, 2025, 25(8): 2490.

3、智能轮胎磨损敏感区域信号特征及估算方法[J]. 汽车工程, 2025, 47(10): 2016-2026.

4、Building Tianjin driving cycle based on linear discriminant analysis[J]. Transportation Research Part D: Transport and Environment, 2017, 53: 78-87.

5、Electronic structural improvement and experimental verification of a tractor-semitrailer air brake system[J]. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2020, 234(8): 2154-2161.

6、Application of genetic fuzzy immune PID algorithm in cruise control for commercial vehicles[J]. AIP Advances, 2020, 10(9).

7、Utilizing principal component analysis and hierarchical clustering to develop driving cycles: a case study in Zhenjiang[J]. Sustainability, 2023, 15(6): 4845.

8、Study on braking stability of commercial vehicles: An optimized air brake system[J]. Advances in Mechanical Engineering, 2019, 11(5): 1687814019848593.

9、Coordinated Path Following Control of 4WID-EV Based on Backstepping and Model Predictive Control[J]. Energies, 2022, 15(15): 5728.

10、Stability analysis of combined braking system of tractor-semitrailer based on phase-plane method[J]. SAE International Journal of Commercial Vehicles, 2018, 11(02-11-02-0012): 151-160.

11、Development Method for the Driving Cycle of Electric Vehicles[J]. Energies, 2022, 15(22): 8715.

12、Mapping the Structure and Evolution of Genetic Algorithm Research: A Scientometric Analysis and Visualization[C]//Proceedings of the 2nd International Conference on Artificial Intelligence and Advanced Manufacture. 2020: 100-106.

13、Mapping and Visualization of Fuzzy Control Research: a Scientometric Analysis during 2010-2019[C]//Proceedings of the 2nd International Conference on Artificial Intelligence and Advanced Manufacture. 2020: 414-421.

14、Modeling and Experimental Study of Relay Valve of Tractor-Semitrailer[J]. Journal of Beijing Institute of Technology, 2019, 28(4): 819-824.

15、驾驶员操作偏差对经济性测试转鼓试验的影响研究[J].汽车技术,2014(11):39-42.

16、城市道路与NEDC工况的制动能量回生率差异分析[J].重庆交通大学学报(自然科学版),2015,34(02):133-136.

17、电动汽车再生制动系统回收特性与能量流分析[J].重庆交通大学学报(自然科学版),2015,34(01):157-161.  

 
科 研 项 目
 
主持或参与的科研项目:

1、863项目:电动汽车测试评价技术研究

2、国家自然科学基金项目:基于传感器靶向配置/解算的智能轮胎状态参数快速准确预测机理研究

3、国家自然科学基金项目:汽车摩擦制动与电磁制动的系统集成和协调控制

4、解放军陆军装备部科研计划项目:重型装备运输车联合制动技术研究

5、江苏省产学研合作项目1项

 
科研成果及奖励
 
江苏省2024年度普通高等学校优秀本科毕业论文(设计)
江苏大学2025年度优秀学业导师
江苏大学2024年度优秀学业导师
 
所 获 专 利
 

1、一种汽车列车制动系统检测的台架(CN201610673880.8)

2、车载式电动轿车和混合动力轿车制动能量回收检测系统(CN201310255786.7)

3、一种排气歧管的耐热连接结构(CN202323574192.0)

4、一种复合度高的齿轮铸造模具(CN202420706222.4)

5、一种电机转动轴(CN202420263966.3)

6、一种提升抗滑水性能的仿生胎面花纹(CN202310902158.7)

7、一种基于轮胎滑移起点位置参数估算路面附着系数的方法(CN202311114924.X)