江苏大学官网 | ENGLISH
学院首页
师资队伍
博士生导师
硕士生导师
在职员工
人才团队
优势资源平台
网站首页 > 师资队伍 > 硕士生导师 > 动力机械及工程学科 > 正文
 
尹必峰
发布日期:2023-05-19   浏览次数:

姓名

尹必峰

 

性别

职务职称

江苏大学教务处处长

博导-所在学科

动力工程与工程热物理、

农业工程(智能化农用车辆关键技术

硕导-所在学科

动力机械及工程热物理(动力机械及工程)

所在学科

动力工程与工程热物理

硕导/博导

博导、硕导

联系电话

0511-88780207

电子信箱

ybf@ujs.edu.cn

学习、工作经历

学习经历

1998年,江苏大学(原江苏理工大学),本科,获学士学位

2001年、2011年,江苏大学,研究生,获硕士、博士学位

2013 年09月-2014 年09月,美国加州大学伯克利分校,国家公派访问学者

工作经历:

2003年、2009年、2015年,江苏大学汽车与交通工程学院,讲师、副教授、教授

2009年、2014年,江苏大学汽车与交通工程学院,硕导、博导

2013年、2021年,江苏省“333工程”第三、第二层次培养对象

2012年,江苏省青蓝工程青年骨干教师培养对象

2014年,入选江苏省六大人才高峰计划资助对象

2014年,江苏大学汽车与交通工程学院,副院长

2019年至今,兼任汽车学院节能与新能源动力总成研究所,所长

2020年至今,江苏省节能与新能源动力总成工程研究中心,主任

2020年-2023年10月,江苏大学汽车与交通工程学院,院长、党委副书记

2023年10月至今,江苏大学教务处处长

江苏省内燃机学会  理事长

中国汽车工程学会  汽车技术教育分会    副主任委员

中国汽车工程学会  汽车先进动力系统分会  委员

中国内燃机学会   常务理事

中国内燃机学会   航空内燃机分会     副主任委员

ISO/TC70 WG7    组长与召集人

科生:动力系统总成与设计、燃料电池动力系统、内燃机学

研究生:节能与新能源汽车动力系统、学科前沿动态技术讲座

节能与新能源动力系统(低碳动力、混合动力、氢能动力、喷雾燃烧、润滑摩擦)

近年部分发表论文【第一作者、通信作者及第二作者(指导学生第一作者)】

1. Xu S, Yin B, Li Z, Dong F*. A review on gas purge of proton exchange membrane fuel cells: Mechanisms, experimental approaches, numerical approaches, and optimization[J]. Renewable and Sustainable Energy Reviews, 2023, 172: 113071. 

2.Xu S, Yin B, Dong F*. Lattice Boltzmann simulation of ice droplet melting process and motion behavior in gas diffusion layer of proton exchange membrane fuel cell under thermal purging[J]. Ionics, 2023, 29: 15531569. 

3. Yin B, Zhang X, Xu S, et al. Numerical Simulation of Liquid Water Transport in a Multiperforated Gas Diffusion Layer of Polymer Electrolyte Membrane Fuel Cells[J]. Journal of Energy Engineering, 2023, 149(2): 4023005.

4. Gu H, Yin B*, Yu Y, et al. Energy Management Strategy Considering Fuel Economy and Life of Fuel Cell for Fuel Cell Electric Vehicles[J/OL]. Journal of Energy Engineering, 2023, 149(1): 4022054.

5.Yin B, Chen Z, Xu S, et al. Effects of fractal network channel on heat and mass transfer in methanol steam reforming[J]. International Journal of Hydrogen Energy, 2022, 47(82): 34810-34824.

6.Chen Z, Jian Y, Yan J, Dong F, Yin B*. A numerical comprehensive evaluation of a micro-type plate autothermal methanol steam reformer with different channel configurations[J]. Chemical Engineering Science, 2022, 262: 118006.

7. Yin B, Xu S, Jia H, et al. Effect of shape parameters on the enhancement of ice-melting performance in a novel perforated gas diffusion layer of proton exchange membrane fuel cell [J]. International Communications in Heat and Mass Transfer, 2022, 136: 106171. 

8. Yin B, Xu S, Jia H*, et al. A novel dynamic contact angle model of lattice Boltzmann method for water droplet impact on proton exchange membrane fuel cell channel surface [J]. International Journal of Energy Research, 2022, 46(7): 9851-9862.

9.Ji W, Yan X, Yu S, Yin B*, et al. Experimental Study on the Non-Circular Orifice Effect on Spray and mixing Characteristics of GDI Injectors[J]. Atomization and Sprays, 2022, 32(1): 1-13.

10.Yin B*, Ye Z, Yu S, Jia H, et al. Experimental Study on the Penetration of Diesel and Biodiesel Spray Liquid Emerging from an Equilateral Triangular Orifice under Evaporative Conditions[J]. Journal of Thermal Science, 2022: 1-10.

11. Yin B*, Xu B, Jia H, et al. Experimental research on the frictional performance of real laser-textured cylinder liner under different lubrication conditions[J]. International Journal of Engine Research, 2022, 23(4): 693-704.

12.Xu B, Yin B*, Jia H, et al. Effects of Liner Surface Textures on the Tribological Performance of Different Production Piston Rings[J]. Lubrication Science, 2022, 34(5): 356-368.

13.Xu B, Yin B*, Gao D, et al. Tribological Performance of Surface Treated Piston Assembly with Infiltrated Layer[J]. Journal of Mechanical Science and Technology, 2022, 36(1): 197-204.

14.Xu B, Yin B*, Jia K, et al. Adaptability of laser textured liner to the effects of methanol diluting oil on the tribological properties[J]. International Journal of Automotive Technology, 2022, 23(2): 461-470.

15. Xu B, Yin B*, Jia H, et al. Experimental research on the wall-wetting effects on the frictional property of the cylinder liner–piston ring pair[J]. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2022, 236(4): 721-731.

16. Kuang X, Yin B*, Yang X, et al. Study of the tribological properties of nano lubricating oil blends for diesel engines[J]. Nano Futures, 2022, 6(1): 015002.

17. Kuang X, Yin B*, Yang X, et al. Study of dispersion stability and wear property of lubricating oil blends added with nanographene for a diesel engine[J]. Lubrication Science, 2022, 34(5): 291-302.

18. Kuang X, Yin B*, Wang J, et al. Dispersion stability and wear properties of nano-CeO2 as lubricating oil additives for engines[J]. Industrial Lubrication and Tribology, 2022, 74(7): 813-819.

19. Xu B, Qiu Y, Yin B*, et al. Influence of Different Modified Gears on the Vibration and Noise of Electric Vehicle Reducer[J]. International Journal of Acoustics and Vibration, 2021, 26(4): 325-336.

20.Yu S, Yin B*, Bi Q, et al. Experimental and numerical investigation on inner flow and spray characteristics of elliptical GDI injectors with large aspect ratio[J]. Energy, 2021, 224: 120119.

21.Yu S, Yin B*, Bi Q, et al. Experimental and numerical investigation on inner flow and spray characteristics of elliptical GDI injectors with large aspect ratio[J]. Energy, 2021, 224: 120119.

22.Yu S, Yin B*, Bi Q, et al. Effects of gasoline and ethanol on inner flows and swallowtail-like spray behaviors of elliptical GDI injector[J]. Fuel, 2021, 294: 120543.

23.Yu S, Yin B*, Jia H, et al. Investigation of inner cavitation and nozzle exit flow patterns for elliptical orifice GDI injectors with various aspect ratios[J]. International Communications in Heat and Mass Transfer, 2021, 129: 105682.

24.Yu S, Yin B*, Bi Q, et al. The influence of elliptical and circular orifices on the transverse jet characteristics at supersonic crossflow[J]. Acta Astronautica, 2021, 185: 124-131. 

25.Xu B, Yin B*, Li Q, et al. Tribological performance of selflubricating polyurethane elastomer compounding with the modified ultrahigh molecular weight polyethylene[J]. Polymer Engineering & Science, 2021, 61(7): 2033-2042.

26. Yin B*, Xu B, Jia H, Yu S. et al. The effect of elliptical diesel nozzles on spray liquid-phase penetration under evaporative conditions[J]. Energies, 2020, 13(9): 2234.

27. Yin B*, Xu S, Yang S, et al. Influence of Microelliptical Groove Gas Diffusion Layer (GDL) on Transport Behavior of Proton Exchange Membrane Fuel Cell (PEMFC) [J]. International Journal of Heat and Mass Transfer, 2021, 180: 121793.

28. Yin B*, Xu S, Yang S, et al. Shape Optimization of a Microhole Surface for Control of Droplet Wettability via the Lattice Boltzmann Method and Response Surface Methodology [J]. Langmuir, 2021, 37(12): 3620-3627.

29. Yin B*, Xie X, Xu S, et al. Effect of pillared surfaces with different shape parameters on droplet wettability via Lattice Boltzmann method [J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2021, 615: 126259.

30. Xie X, Yin B*, Xu S, et al. Influence of perforated gas diffusion layer micropore shape parameters on water removal in a proton exchange membrane fuel cell flow channel [J]. International Journal of Energy Research, 2021, 45(10): 14630-14613.

31. Kuang X, Yin B*, Xu B, et al. Effects of diesel fuel nano-additives on friction and wear properties of precision coupled parts of a diesel engine fuel injection system[J]. Tribology Transactions, 2021, 64(1): 21-30.

32. Yin B*, Kuang X, Xu B, et al. Experimental study on the tribological behaviour of CeO2 Diesel blends on the injector body[J]. Lubrication Science, 2020, 32(6): 283-291.

33.解玄,尹必峰*,陈诗越,. 激光作用时间变化下毛化织构表面成形机理与演变规律[J].中国表面工程,2021,34(05):169-180.

34.佟德辉,尹必峰*,徐波,.缸套表面分区差异织构的润滑摩擦性能研究[J].内燃机学报,2021,39(05):451-458.

35.徐波,尹必峰*,贾和坤,. 燃油稀释低黏度机油对柴油机缸套活塞环润滑性能的影响[J].农业工程学报,2021,37(11):60-66.

36. Xie X, Yin B*, Xu S, et al. Effects of microstructure shape parameters on water removal in a PEMFC lotus-like flow channel [J]. International Journal of Hydrogen Energy, 2020, 47(5): 3473-3483.

37. Yin B*, Xu B, Jia H, Yu S. et al. The effect of elliptical diesel nozzles on spray liquid-phase penetration under evaporative conditions[J]. Energies, 2020, 13(9): 2234.

38. Yu S, Yin B*, Deng W, et al. Experimental study on the spray and mixing characteristics for equilateral triangular and circular nozzles with diesel and biodiesel under high injection pressures[J]. Fuel, 2019, 239: 97-107.

39. Yu S , Yin B*, Deng W , et al. An experimental comparison of the elliptical and circular nozzles spray and mixing characteristics under different injection pressures[J]. Fuel, 2019, 236:1474-1482.

40. Yu S, Yin B*, Deng W, et al. Computational Analysis of Flow Patterns in Elliptical Diesel Nozzles at High Injection Pressures[J]. Atomization and Sprays, 2018, 28(11).

41. Yu S, Yin B*, Deng W, et al. Numerical Investigation on Effects of Elliptical Diesel Nozzle on Primary Spray Characteristics by Large Eddy Simulation (LES)[J]. Atomization and Sprays, 2018, 28(8).

42. Yu S , Yin B*, Deng W, et al. Experimental study on the diesel and biodiesel spray characteristics emerging from equilateral triangular orifice under real diesel engine operation conditions[J]. Fuel, 2018, 224:357-365.

43. Yu S , Yin B*, Deng W, et al. Experimental study on the spray characteristics discharging from elliptical diesel nozzle at typical diesel engine conditions[J]. Fuel, 2018, 221:28-34.

44. Yu S , Yin B*, Deng W, et al. Internal flow and spray characteristics for elliptical orifice with large aspect ratio under typical diesel engine operation conditions[J]. Fuel, 2018, 228:62-73.

45. Yin B*, Gao D, Sun S, et al. Research on the profile design of surface texture in piston ring of internal combustion engine[J]. Journal of Tribology, 2018, 140(6): 061701.

46. Yin B*, Xu B, Qian Y, et al. Lubrication adaptability to the variations of combustion modes by texturing cylinder liner in engines[J]. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2018, 232(7): 946-957.

47. Yin B*, Xu B, Jia H, et al. Effects of the array modes of laser-textured micro-dimples on the tribological performance of cylinder liner–piston ring[J]. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2018, 232(7): 871-881.

48. Yin B*, Zhou H, Xu B, et al. The influence of roughness distribution characteristic on the lubrication performance of textured cylinder liners[J]. Industrial Lubrication and Tribology, 2018.

49. Yu S, Yin B*, Wen S, et al. Experimental Investigation on the Early Stage Spray Characteristics with Biodiesel and Diesel[C]//Ilass Europe. 28th european conference on Liquid Atomization and Spray Systems. Editorial Universitat Politècnica de València, 2017: 473-479.

50. Yu S, Yin B*, Jia H, et al. Numerical research on micro diesel spray characteristics under ultra-high injection pressure by Large Eddy Simulation (LES)[J]. International Journal of Heat and Fluid Flow, 2017, 64:129-136.

51. Yin B*, Sun S, Wang B, et al. Numerical Research on Tribological Performance of Textured Liner Surface Under Different Combustion Modes[J]. Journal of Engineering for Gas Turbines & Power, 2017, 1(1).

52. Xu B, Yin B*, et al. Wall-wetting Effects on the Tribological Performance of Cylinder liner-piston ring in Diesel Engines[J]. 2017.

53. Yin B*, Yu S, Jia H, et al. Numerical research of diesel spray and atomization coupled cavitation by Large Eddy Simulation (LES) under high injection pressure [J]. International Journal of Heat & Fluid Flow, 2016, 59:1-9.

 

近年部分主持科研项目

1.高效可靠燃料电池汽车液氢储供系统及车载匹配技术,省碳达峰碳中和科技创新专项重点项目,2022-2025,250

2.大马力电驱动无级变速混动拖拉机关键技术攻关,省重大关键核心技术(装备)攻关项目,2022-2024,900万

3.xxxxxx,科研重点项目,2021- ,350

4.xxxxxx,“十四五”预研项目,2023-,370

5.全自动动力换挡重型拖拉机关键核心技术攻关,省关键核心技术(装备)攻关项目,2021-2023,460万

6.超低油耗多档位混合动力专用变速器研发及产业化,省战略性新兴产业项目,128

7.多档位混合动力变速箱仿真优化设计开发,产学研合作,2020-2022360

8.工程机械大扭矩行走机构动态设计关键技术,产学研合作,2020-2022192

9.氢燃料电池电-电混合SUV动力系统协同管理关键技术,省重点研发计划重点项目,2019-2023,180

10.低能耗智能化制备国六活塞环绿色关键工艺系统集成项目,国家绿色系统集成制造项目,2017-201942

11.内燃机表面织构多重润滑模式减磨机理与主动设计,某国家重点实验开放课题,2018-202025

12.内燃机分区差异织构润滑减摩与机油消耗机理及其协同控制研究,国家自然科学基金,2014-2017,80万

13.超低排放柴油机高压微细异形喷孔射流雾化特性及多参数虚拟优化研究,“六大人才高峰”资助项目,2014-20165万

14.喷油嘴超高压微细喷孔流动特性及雾化机理研究,中国博士后基金面上项目一等资助(2013M530236),2013-2015,8万

15.超声速燃烧室煤油射流雾化-蒸发模型研究,某国家重点实验室开放课题,2017-202020

科研成果及奖励

1. 入选江苏省十大技术转移优秀案例项目,2023年,排名第一

2. 23届中国专利优秀奖,2022年,排名第一

3. 江苏省科学技术二等奖,2020年,排名第一

4. 中国产学研合作创新成果一等奖,2020年,排名第一

5. 中国发明协会发明创新一等奖,2020年,排名第一

6. 教育部技术发明二等奖,2016年,排名第二

7. 江苏省科学技术二等奖,2015年,排名第一

8. 主持修订国际标准1项(ISO 11102-1 2020,排名第一

 

部分授权发明专利与PCT技术

1. 一种内燃机—燃料电池混合动力总成一体式水热管理系统及控制策略[P]CN112937546B.

2. 一种车用高压加热系统的复合式疏水型水腔[P]CN111342169B.

3. 一种疏水性燃料电池双极板和方法[P]CN110729497B.

4. 一种燃料电池气体扩散层结构及其加工方法[P]CN112072119B.

5. 一种车辆混合动力系统的变速器及控制方法[P]CN113043828B.

6. 一种燃料电池气体扩散层及加工方法[P]CN113178590B.

7. 一种用于质子交换膜燃料电池的气体扩散层及其加工工艺[P]CN113178591B.

8. 一种油电混合动力系统的余热管理装置及管理方法[P]CN112744128B.

9. 一种燃料电池电动汽车一体式水热管理系统及控制策略[P]CN112952142B.

10. 一种氢燃料电池汽车制动能量回收装置及控制方法[P]CN113246927B.

11. 一种内燃机缸套及其加工方法[P]CN112228236B.

12. 一种冷挤压模具表面超快激光微织构自润滑方法[P]CN111136383B.

13. 内燃机与燃料电池混合动力装置及控制方法[P]CN112092601B.

14. 一种带增程式燃料电池的拖拉机混合动力系统及控制方法[P]CN112092602B.

15. 一种船用内燃机与燃料电池的混合动力系统及其控制方法[P]CN112078772B.

16. 一种带微织构的燃料电池质子交换膜及其加工方法[P]CN111864244B.

17. 一种混合动力叉车的动力传动系统及其控制方法[P]CN111231648B.

18. 一种基于凹凸复合微结构燃料电池质子交换膜[P]CN111799491B.

19. 一种发动机声品质预测方法[P]CN109443778B.

20. 一种激光热力耦合织构固体润滑涂层制备方法[P]CN108893733B.

21. 一种航空发动机叶片榫头毛化织构涂层处理方法及发动机叶片[P]CN107475666B.

22. 一种激光电火花复合加工装置及其工作方法[P]CN109648189B.

23. 动力电池包冷却与加热系统及使用该系统的方法[P]CN109411849B.

24. 一种齿轮复合塑性成形模具表面微形貌处理方法[P]CN109158523B.

25. 一种高功率密度动力电池冷却系统[P]CN108539307B.

26. 一种燃料电池双极板和方法[P]CN110752386A.

27. 一种燃料电池气体扩散层及加工方法[P]CN112117465A.

28.     一种带微织构的燃料电池质子交换膜及其加工方法[P]: CN111864244B.

29. 一种燃料电池气体扩散层及加工方法[P]CN113178590A.

30. 一种用于质子交换膜燃料电池的气体扩散层及其加工工艺[P]CN113178591A.

31.     一种高功率密度动力电池冷却系统[P]CN108539307A.

32. 一种氨气浓度分布测试装置[P]ZL201810137671.0.

33. 一种内燃机活塞环及安装该活塞环的内燃机[P]ZL201610293569.0.

34. 一种内燃机活塞环及安装该活塞环的内燃机[P]ZL201610294683.5.

35. 燃油喷射装置的针阀组件[P]ZL201410324813.6.

36. 内燃机缸套[P]ZL201510763839.5.

37. 柴油机喷油泵的柱塞及柱塞偶件[P]ZL201510491925.5.

38. 柴油机喷油嘴的针阀、针阀偶件及针阀加工方法[P]ZL201510491813.X.

39.     一种内燃机缸盖鼻梁区沸腾可视化实验装置[P]CN104390791A.

40.     燃油喷射装置的针阀组件[P]CN103982350A.

41.    回路可调的废气再循环系统[P]CN103982334A.

42.    全平衡单缸柴油机[P]CN101398055.

43.    单缸柴油机全平衡方法及其机构[P]CN101387330.

44. 一种燃料电池电动汽车一体式水热管理系统及控制策略[PCT]: PCT/ CN112952142B.

45. 一种带微织构的燃料电池质子交换膜及其加工方法[PCT]: PCT/CH 717791 B1

 

 


 
版权所有:江苏大学汽车与交通工程学院 All rights reserved.
地址: 江苏省镇江市学府路301号
 电话:0511-88797620 传真:0511-88797620-2603
关注公众号